Duel of Meloch Metal Mechs: Assembly, Care, and Display Tips
By Stonemaier Games US & International Store | Published: 2026-10-31
Category: Tips & Care
A practical, step-by-step guide to assembling, protecting, painting, and displaying your Duel of Meloch metal mechs so they stay table-ready for years.
Quick answer
To get the most from your Duel of Meloch metal mechs, snap each figure onto its silicon base, handle it by the base rather than the limbs, and store it in a padded case. If you plan to paint, clean and prime first, then seal after painting.
Why metal mechs need a different care routine
Metal miniatures are heavier and more brittle than plastic ones, so they can chip paint or bend if dropped. The included silicon base snaps help keep them stable during play, but they do not protect against impact. A consistent handling and storage routine prevents most damage.
When to skip painting or extra assembly
If you prefer the bare metal look, you can skip painting entirely. The mechs are ready to use once based. Also, these miniatures come pre-assembled; no glue is required. Only consider painting if you want a custom finish and are comfortable with the extra steps.
Step-by-step assembly and care
- Unpack and inspect: Remove all five mechs and the five silicon base snaps from the packaging. Check each mech for loose parts or bending. Common mistake: discarding the base snaps with the packaging. Keep the base snaps in a small bag so they don't get lost.
- Attach the base snaps: Press each mech firmly onto a silicon base snap until it sits flush. The snap should hold the mech securely without wobbling. Common mistake: forcing the mech onto the base at an angle, which can bend the feet. Test stability by gently tapping the base on a table; the mech should not rock.
- Handle by the base: Always pick up and move the mech by its base, not by the arms or weapons. Metal parts can bend under pressure. Common mistake: grabbing the mech by a thin limb, which may cause permanent deformation. Show new players how to hold the mech correctly before their first game.
- Clean before painting (optional): If you plan to paint, wash the mechs in warm water with a drop of dish soap, then rinse and dry completely. This removes mold release agents. Common mistake: painting directly on the bare metal without cleaning, which leads to poor paint adhesion. Let the mechs air-dry overnight before priming.
- Prime and paint: Apply a thin coat of metal primer, then paint with acrylics designed for miniatures. Use a brush-on or spray primer in a well-ventilated area. Common mistake: applying thick layers that obscure detail. Paint in thin layers and let each dry before adding the next.
- Seal the paint: After painting, apply a matte or gloss varnish to protect the paint from chipping. Follow the varnish instructions for drying time. Common mistake: skipping the seal, which leaves paint vulnerable to wear. Seal in a dust-free area to avoid trapped particles.
- Store safely: Store mechs in a padded case or box with individual compartments. Keep them away from moisture and direct sunlight. Common mistake: tossing mechs loosely into a single container, causing scratches and bent parts. Use foam trays or small cloth bags for each mech.
Product facts
- Duel of Meloch Metal Mechs: This pack of 5 metal mech miniatures includes 1 Expeditions mech, 4 Scythe mechs, and 5 silicon base snaps. The included base snaps mean you can stabilize each mech immediately without buying extra parts.

Duel of Meloch Metal Mechs
